Scalable substrate development for aqueous sample preparation for atom probe tomography.

Reliable and consistent preparation of atom probe tomography (APT) specimens from aqueous and hydrated biological specimens remains a significant challenge. One particularly difficult process step is the use of a focused ion beam (FIB) instrument for preparing the required needle-shaped specimen, typically involving a 'lift-out' procedure of a small sample of material. Here, two alternative substrate designs are introduced that enable using FIB only for sharpening, along with example APT datasets. The first design is a laser-cut FIB-style half-grid close to those used for transmission electron microscopy (TEM) that can be used in a grid holder compatible with APT pucks. The second design is a larger, standalone self-supporting substrate called a 'crown', with several specimen positions, which self-aligns in APT pucks, prepared by electrical discharge machining (EDM). Both designs are made nanoporous, to provide strength to the liquid-substrate interface, using chemical and vacuum dealloying. Alpha brass, a simple, widely available, lower-cost alternative to previously proposed substrates, was selected for this work. The resulting designs and APT data are presented and suggestions are provided to help drive wider community adoption.

A Versatile and Reproducible Cryo-sample Preparation Methodology for Atom Probe Studies.

Repeatable and reliable site-specific preparation of specimens for atom probe tomography (APT) at cryogenic temperatures has proven challenging. A generalized workflow is required for cryogenic specimen preparation including lift-out via focused ion beam and in situ deposition of capping layers, to strengthen specimens that will be exposed to high electric field and stresses during field evaporation in APT and protect them from environment during transfer into the atom probe. Here, we build on existing protocols and showcase preparation and analysis of a variety of metals, oxides, and supported frozen liquids and battery materials. We demonstrate reliable in situ deposition of a metallic capping layer that significantly improves the atom probe data quality for challenging material systems, particularly battery cathode materials which are subjected to delithiation during the atom probe analysis itself. Our workflow design is versatile and transferable widely to other instruments.

Understanding the Degradation of a Model Si Anode in a Li-Ion Battery at the Atomic Scale.

To advance the understanding of the degradation of the liquid electrolyte and Si electrode, and their interface, we exploit the latest developments in cryo-atom probe tomography. We evidence Si anode corrosion from the decomposition of the Li salt before charge-discharge cycles even begin. Volume shrinkage during delithiation leads to the development of nanograins from recrystallization in regions left amorphous by the lithiation. The newly created grain boundaries facilitate pulverization of nanoscale Si fragments, and one is found floating in the electrolyte. P is segregated to these grain boundaries, which confirms the decomposition of the electrolyte. As structural defects are bound to assist the nucleation of Li-rich phases in subsequent lithiations and accelerate the electrolyte's decomposition, these insights into the developed nanoscale microstructure interacting with the electrolyte contribute to understanding the self-catalyzed/accelerated degradation Si anodes and can inform new battery designs unaffected by these life-limiting factors.

Status and Direction of Atom Probe Analysis of Frozen Liquids.

Imaging of liquids and cryogenic biological materials by electron microscopy has been recently enabled by innovative approaches for specimen preparation and the fast development of optimized instruments for cryo-enabled electron microscopy (cryo-EM). Yet, cryo-EM typically lacks advanced analytical capabilities, in particular for light elements. With the development of protocols for frozen wet specimen preparation, atom probe tomography (APT) could advantageously complement insights gained by cryo-EM. Here, we report on different approaches that have been recently proposed to enable the analysis of relatively large volumes of frozen liquids from either a flat substrate or the fractured surface of a wire. Both allowed for analyzing water ice layers which are several micrometers thick consisting of pure water, pure heavy water, and aqueous solutions. We discuss the merits of both approaches and prospects for further developments in this area. Preliminary results raise numerous questions, in part concerning the physics underpinning field evaporation. We discuss these aspects and lay out some of the challenges regarding the APT analysis of frozen liquids.

In Situ XPS Investigation of Transformations at Crystallographically Oriented MoS2 Interfaces.

Nanoscale transition-metal dichalcogenide (TMDC) materials, such as MoS2, exhibit promising behavior in next-generation electronics and energy-storage devices. TMDCs have a highly anisotropic crystal structure, with edge sites and basal planes exhibiting different structural, chemical, and electronic properties. In virtually all applications, two-dimensional or bulk TMDCs must be interfaced with other materials (such as electrical contacts in a transistor). The presence of edge sites vs basal planes (i.e., the crystallographic orientation of the TMDC) could influence the chemical and electronic properties of these solid-state interfaces, but such effects are not well understood. Here, we use in situ X-ray photoelectron spectroscopy (XPS) to investigate how the crystallography and structure of MoS2 influence chemical transformations at solid-state interfaces with various other materials. MoS2 materials with controllably aligned crystal structures (horizontal vs vertical orientation of basal planes) were fabricated, and in situ XPS was carried out by sputter-depositing three different materials (Li, Ge, and Ag) onto MoS2 within an XPS instrument while periodically collecting photoelectron spectra; these deposited materials are of interest due to their application in electronic devices or energy storage. The results showed that Li reacts readily with both crystallographic orientations of MoS2 to form metallic Mo and Li2S, while Ag showed very little chemical or electronic interaction with either type of MoS2. In contrast, Ge showed significant chemical interactions with MoS2 basal planes, but only minor chemical changes were observed when Ge contacted MoS2 edge sites. These findings have implications for electronic transport and band alignment at these interfaces, which is of significant interest for a variety of applications.